|
Product Details:
|
| Other Name: | Sludge Decanter Centrifuge | Type: | Centrifuge |
|---|---|---|---|
| Application: | Sludge Dewatering | Function: | Liquid Soild Centrifge |
| Operation: | Continuous | Separation Factor: | 2580 |
| High Light: | High Speed Horizontal Decanter Centrifuge,Decanter Centrifuge For Mud Treatment,Sludge dewatering Decanter Centrifuge Machine |
||
High Speed Horizontal Decanter Centrifuge China Supplier Especially For Mud Treatment
Mud water is a kind of suspended liquid containing a certain amount of fine mud particles in the water. The characteristics of mud mainly depend on its composition, and also related to local geological conditions.
Appearance of slurry water: earthy yellow, uniform and sticky, and it will not be layered even if it is still for a long time,
The special mud centrifuge designed by Juneng Machinery adopts a small length-diameter ratio while maintaining a large speed difference during operation, thus achieving the effect of rapid mud dehydration and drying. The processing capacity of the centrifuge is large, and there is enough "stomach" to eat the mud into the stomach and "melt" it in time. There is no need to worry about the pollution of the environment and the high cost of vehicle transportation. The dried mud can be transported quickly from the site, and the number of vehicles used will be greatly reduced.
The mud mainly comes from building piling, sand field, tunnel cave, mine tailings, etc.
Improper treatment of construction mud will pollute the environment, cause a lot of water and soil loss, silting up the river, affect the water quality and damage the municipal facilities.
With the increasing awareness of social civilization and environmental protection of modern people, more and more attention has been paid to the environmental problems brought about, and the mud treatment technology and relevant special equipment for mud treatment have also come out.
| The three characteristics of mud are: |
| ① Large mud production: once the construction machinery is started, it can produce a large amount of mud in a short time; |
| ② Difficulty in storage: there is no large-volume mud pool on site, direct discharge will pollute the environment, and the cost of vehicle transportation is high, so on-site treatment is the best solution; |
| ③ Easy to separate: the weight difference between the solid phase and the liquid phase of the mud is large, and it is easy to separate. |
Up to now, the mud dewatering and drying processes mainly include vacuum suction filtration, pressure filtration and centrifugal separation.
1. The effect of vacuum suction filtration method is poor because the mud settles in the lower layer. When vacuuming, the mud layer becomes denser and it is difficult to suck out water.
2. The effect of the filter press method is acceptable, but it is difficult to use the filter press on the construction site because of its high mud content
3. The special separator for mud treatment of Juneng Company is characterized by confidential closed automatic continuous operation, no need for flocculation equipment, and is suitable for the site construction environment. It can fundamentally replace the current original and backward treatment methods, improve treatment efficiency, reduce treatment costs, protect the urban environment, and achieve civilized construction on site.
The special mud centrifuge designed by Juneng Machinery adopts a small length-diameter ratio while maintaining a large speed difference during operation, thus achieving the effect of rapid mud dehydration and drying. The processing capacity of the centrifuge is large, and there is enough "stomach" to eat the mud into the stomach and "melt" it in time. There is no need to worry about the pollution of the environment and the high cost of vehicle transportation. The dried mud can be transported quickly from the site, and the number of vehicles used will be greatly reduced.
Contact Person: Lee
Tel: 86-13601538852
Fax: 86-0510-87501218
